Classic 2-tier Crystal Clear Acrylic Lightsaber

It is important to note that the Lightsaber as shown in the pictures is not included. This is a 2-Tier Crystal Clear Acrylic Stand with Laser Engraved Text that should be compatible with any Lightsabers. The width of the stand is 19 cm. You can choose to have the cradles at both sides the same height be selecting 'Standard' option, or to have one side slightly higher (6 mm higher) than the other by choosing 'Graflex/MPP'. It is recommended that you choose the cradle height option 'Graflex/MPP' if you planned to use the stand for sabers with grips like Graflex or MPP, or if you planned to display your Lightsaber while the blade is inserted. For Lightsaber that has (or mostly has) consistent OD, you might want to choose the option 'Standard' to have your hilt displayed properly on the stand. For 'Graflex/MPP' option it is by default higher on the right side. Send me a note if you want the left side to be higher instead. I have also added a 'Luke ROTJ' option for you if you want the option that is adjusted  exclusively to fit 'KR Hero'. Remember that the cradle height is still higher on the right side. Please send me a note if you want higher cradle to be on the left instead. Please send me a message to specify the 'Text Option' and the 'Cradle Option'. Text Options: Graflex Luke Skywalker Obi-wan Kenobi Darth Vader A New Hope Empire Strikes Back Return of the Jedi The Force Awakens Custom Order No Engraving Cradle Options:
Standard Graflex/MPP
Luke ROTJ Remember that you will have to select the cradle options for both tiers of the stand, so keep in mind which saber will be displayed in which tier. The first tier is the lower one, and the second tier is the upper one. For example, if you want to lower tier to be 'Graflex/MPP' cradle option, and the upper tier to be 'Standard', please specify 'Graflex, Standard' in the note left for me upon purchase. Cradle options guidelines: 'Graflex/MPP' Best for Korbanth Graflex 2.0/2.5, Vintage Graflex, Korbanth MPP, Korbanth DV6 and other similar models 'Luke ROTJ' Best for KR Hero, Solo's Hold V2 and other similar models 'Standard' Best for all other sabers which has pretty much consistent outside diameter of the hilt e.g. KR Deep Groove Qui-Gon Jinn, Korbanth DM1 and other similar models Please also note that due to all the options available for this stand, this is a made-to-order product which requires 7-14 days lead time before they are ready to ship. All the stands are tested to fit properly prior to shipping. When assemble your acrylic stand, do not put too much force into inserting the plaque inside the cradles. The cradle is made to fit either side of the plaque , not both. If it is too tight or too loose, try inserting that side of the plaque inside another cradle. The best way is to lay the cradle flat on the table, and try to insert the plaque by pushing it down inside the cradle vertically. If you break your stand while assembling it, I will take no responsible in replacing it for free. All the stands are cut precisely for its cradles due to the possibility of thickness differences of Acrylic sheet, hence the cradles cannot be switched with cradles from a set of another stand. If you need a specific side of the cradle to be higher than the other, please make a note while making the purchase to let me know. Otherwise I will choose for you as I see fit. Your item will be shipped with Thailand Post Priority Airmail , after it is shipped, your shipment will take 14-35 days to be delivered depending on where you live. Like me on Facebook: https://www.facebook.com/thesabersupply/

Returns Not Accepted